April 7-8, 2020
Conference Center, 8401 Greenway Blvd., Middleton, WI 53562
This two-day training class will teach the four major modules of Pandat software: PanPhaseDiagram, PanPrecipitation, PanDiffusion, and PanSolidification. A brief introduction on the PanOptimizer module and PanEngine API will also be presented. No previous knowledge of Pandat software or computational thermodynamics is necessary.
In this class, you will learn how to calculate and plot stable and meta-stable phase diagrams and property diagrams of multicomponent alloys. For the PanPhaseDiagram module, you will learn how to obtain the information you need through point calculation, line calculation, and section calculation. You will also learn the advance features, such as contour diagrams, 3D colormap diagrams, and high-throughput calculation (HTC). For the PanPrecipitation module, you will learn how to set-up the calculation through GUI and batch calculation. You will learn how to calculate the hardness of aluminum alloys and precipitation of of nickel-base superalloys. For the PanDiffusion module, you will learn how to perform diffusion simulation under variety of conditions. You will also learn to use the new PanSolidification module to perform solidification simulation. The class will be taught in English.
The training class is hands-on with each participant working at his/her own computer. Please bring your own laptop. Training materials, lunches and refreshments will be provided. The training is free. You need to take care of your travel and lodge.
Registration Deadline: 3/10/2020Please fill the Registration Form and return it to info@computherm.com. Please contact Mingzhen Yang for any questions.
Agenda
Day 1: PanPhaseDiagram and PanSolidification Modules (April 7)
9:00 – 10:00am Welcome and Introduction to PandatTM Software
10:00 – 10:15am Break
10:15 – 11:45am Tutorial on the basic features of PanPhaseDiagram Module
11:45 – 12:45pm Lunch
12:45 – 2:00pm Tutorial on the advanced features of PanPhaseDiagram Module
2:00 – 3:15pm Hands-on practice on PanPhaseDiagram Module
3:15 – 4:15pm Tutorial on the basic features of PanSolidification Module
4:15 – 4:45pm Questions and Discussions
Day 2: PanPrecipitation and PanDiffusion Modules (April 8)
9:00 – 9:30am: Introduction to PanPrecipitation Module
9:30 – 10:30am: Tutorial on the PanPrecipitation Module
10:30 – 10:45am Break
10:45 – 11:45am Hands-on practice on PanPrecipitation Module
11:45 – 12:45pm Lunch
12:45 – 1:15pm Introduction to PanDiffusion Module
1:15 – 2:00pm Tutorial on the PanDiffusion Module
2:00 – 2:15pm Break
2:15 – 3:15pm Hands-on practice on PanDiffusion Module
3:15 – 4:00pm Questions and Discussions