Publications on Coating; Oxidation; Decarburization

Research on design and microstructure of hot-dip Zn-Al-Mg/Sn alloy
Ding, C., Ma, Z., Liu, S., Zhao, J., Luo, Q., Liu, H., Wu, G. and Zhang, J.
(2022) Materials Characterization 185: 111746
https://doi.org/10.1016/j.matchar.2022.111746

Effect of post-brazing heat treatment on the corrosion mechanism of sandwich multi-layered aluminium sheets
Yuan, Z., Tu, Y., Yuan, T., Zhang, Y. and Huang, Y.
(2021) Vacuum 183: 109781
https://doi.org/10.1016/j.vacuum.2020.109781

Research on high-temperature oxidation resistance, hot forming ability, and microstructure of Al–Si–Cu coating for 22MnB5 steel
Xiong, Z., Lin, Z., Qi, J., Sun, L., Wu, G., Kuang, S. and Zhou, G.
(2021) High Temperature Materials and Processes 40(1): 397-409
https://doi.org/10.1515/htmp-2021-0040

Environmental degradation of electroplated nickel and copper coated SS316H in molten FLiNaK salt
Weinstein, M., Falconer, C., Doniger, W., Bailly-Salins, L., David, R., Sridharan, K. and Couet, A.
(2021) Corrosion Science 191: 109735
https://doi.org/10.1016/j.corsci.2021.109735

Design and properties of Al-10Si-xZn-yMg alloy for hot dip coating
Wei, C., Guangxin, W. and Jieyu, Z.
(2021) Surface and Coatings Technology 416: 127134
https://doi.org/10.1016/j.surfcoat.2021.127134

Effect of Ni-interlayer on zinc-assisted liquid-metal-induced-embrittlement susceptibility of 22MnB5 galvanized steel
Peng, W.-J., Wu, G.-X., Li, R.-B., Jiang, P.-G. and Zhang, J.-Y.
(2021) Surface and Coatings Technology 422: 127550
https://doi.org/10.1016/j.surfcoat.2021.127550

Decarburization of 60Si2MnA in 20 Pct H2O-N2 at 700 °C to 900 °C
Chen, Y. R., Zhang, F. and Liu, Y.
(2020) Metallurgical and Materials Transactions A 51(4): 1808-1821
https://doi.org/10.1007/s11661-020-05644-0

Pandat™ Simulation of the Solidification Sequence and Microstructure Development of the 2 Pct Mg-55 Pct Al-1.6 Pct Si-Zn Coating on Steel
Chen, Y. R. and Zhang, F.
(2020) Metallurgical and Materials Transactions A 51(10): 5228-5244
https://doi.org/10.1007/s11661-020-05936-5

Decarburization of 60Si2MnA in Atmospheres Containing Different Levels of Oxygen, Water Vapour and Carbon Dioxide at 700–1000 °C
Chen, Y. R., Xu, X. and Liu, Y.
(2020) Oxidation of Metals 93(1): 105-129
https://doi.org/10.1007/s11085-019-09949-3

Examination and Analysis of 2 Pct Mg-55 Pct Al-1.6 Pct Si-Zn Coating on Steel
Chen, Y. R.
(2020) Metallurgical and Materials Transactions A 51(11): 5758-5770
https://doi.org/10.1007/s11661-020-05983-y

Influence of manganese on microstructure of hot-dip Al-10Si-2Fe alloy coating
Wu, G. X. and Zhang, J. Y.
(2019) Chinese Journal of Nonferrous Metals 29: 122-130
https://doi.org/10.19476/j.ysxb.1004.0609.2019.01.14

Interface reaction of high-strength low-alloy steel with Al–43.4Zn–1.6Si (wt.%) metallic coating
Peng, W. J., Wu, G. X., Cheng, Y. and Zhang, J. Y.
(2019) Journal of Iron and Steel Research International 26(12): 1304-1314
https://doi.org/10.1007/s42243-019-00275-1

The evaluation on corrosion resistance and dross formation of Zn-23 wt % Al-0.3 wt % Si-x wt % Mg alloy
Peng, W., Wu, G., Lu, R., Lian, Q. and Zhang, J.
(2019) Coatings 9(3)
https://doi.org/10.3390/COATINGS9030199

Diffusion and cracking behavior involved in hot press forming of Zn coated 22MnB5
Peng, H., Peng, W., Lu, R., Wu, G. and Zhang, J.
(2019) Journal of Alloys and Compounds 806: 195-205
https://doi.org/10.1016/j.jallcom.2019.07.232

Oxidation synthesis of Hf6Ta2O17 superstructures
Yang, Y., Perepezko, J. H. and Zhang, C.
(2017) Materials Chemistry and Physics 197: 154-162
https://doi.org/https://doi.org/10.1016/j.matchemphys.2017.04.055

Thermodynamic analysis and experimental study on the oxidation of the Zn-Al-Mg coating baths
Su, X., Zhou, J., Wang, J., Wu, C., Liu, Y., Tu, H. and Peng, H.
(2017) Applied Surface Science 396: 154-160
https://doi.org/10.1016/j.apsusc.2016.11.043

The effect of silicon on spangle size in hot-dipped 55wt%Al-Zn coatings
Peng, H., Wu, G., Peng, W., Cao, B. and Zhang, J.
(2017) Surface and Coatings Technology 327: 110-117
https://doi.org/10.1016/j.surfcoat.2017.07.074

The role of Ti and Si in the nucleation of α-Al during hot dip coating of steel with Al–43.4wt.%Zn–1.6wt.%Si alloy
Peng, W., Du, Q., Wu, G., Dan, W., Hu, W. and Zhang, J.
(2016) Surface and Coatings Technology 299: 56-64
https://doi.org/10.1016/j.surfcoat.2016.04.074

Grain Refinement Behavior of Al-Zn-Si Alloy by Inoculation in Hot-Dip Coating
Peng, W., Wu, G., Dai, X., Zhang, J., Hu, W. and Chou, K.
(2015) Light Metals 2015. Hyland, M. Cham, Springer International Publishing: 301-306
https://doi.org/10.1007/978-3-319-48248-4_51

Part I. Thermodynamic and Kinetic Aspects of the Hot Dip (Zn) – Coating Formation
Sypień, A., Kucharska, B., Wołczyński, W., Pogoda, Z., Garzeł, G. and Okane, T.
(2014) Archives of Metallurgy and Materials(No 3 September)
https://doi.org/10.2478/amm-2014-0212

Microstructure and Thickness of 55 pct Al-Zn-1.6 pct Si-0.2 pct RE Hot-Dip Coatings: Experiment, Thermodynamic, and First-Principles Study
Wu, G., Zhang, J., Li, Q., Chou, K. and Wu, X.
(2012) Metallurgical and Materials Transactions B 43(1): 198-205
https://doi.org/10.1007/s11663-011-9578-2

Chromia-Assisted Decarburization of W-Rich Ni-Based Alloys in Impure Helium at 1273 K (1000 °C)
Adharapurapu, R. R., Kumar, D., Zhu, J., Torbet, C. J., Was, G. S. and Pollock, T. M.
(2011) Metallurgical and Materials Transactions A 42(5): 1229-1244
https://doi.org/10.1007/s11661-010-0503-0

Carburization of W- and Re-rich Ni-based alloys in impure helium at 1000°C
Adharapurapu, R. R., Kumar, D., Zhu, J. and Pollock, T. M.
(2011) Corrosion Science 53(1): 388-398
https://doi.org/https://doi.org/10.1016/j.corsci.2010.09.049

Publications related to different topics