Publications on Magensium-based Alloys

Simultaneous refinement of α-Mg grains and β-Mg17Al12 in Mg-Al based alloys via heterogeneous nucleation on Al8Mn4Sm
Chen, J.-C., Li, M.-X., Yu, Z.-Y., Meng, Z.-Y., Wang, C., Yang, Z.-Z. and Wang, H.-Y.
(2023) Journal of Magnesium and Alloys 11(1): 348-360
https://doi.org/10.1016/j.jma.2022.11.016

Enhanced elevated temperature mechanical properties of AE84 heat-resistant cast magnesium alloy
Gao, J., Sun, X., Zhou, Y., Dong, Q., Tan, J., Chen, X., Jiang, B. and Pan, F.
(2023) Vacuum 207: 111662
https://doi.org/10.1016/j.vacuum.2022.111662

On the effect of trace Si on accelerating the corrosion of Mg-Mn alloys
Yang, L., Xu, W., He, S., Zhang, E., Zhang, X., Zhang, T. and Qin, G.
(2022) Corrosion Science 201: 110258
https://doi.org/10.1016/j.corsci.2022.110258

Nucleation of recrystallization in magnesium alloy grains of varied orientation and the impacts on texture evolution
Miller, V. M., Nie, J.-F. and Pollock, T. M.
(2022) Journal of Magnesium and Alloys 10(11): 3041-3053
https://doi.org/10.1016/j.jma.2022.09.006

Thermodynamic prediction of thermal diffusivity and thermal conductivity in Mg–Zn–La/Ce system
Xie, T., Shi, H., Wang, H., Luo, Q., Li, Q. and Chou, K.-C.
(2022) Journal of Materials Science & Technology 97: 147-155
https://doi.org/10.1016/j.jmst.2021.04.044

Plastic instability and texture modification in extruded Mg-Mn-Nd alloy
Woo, S. K., Pei, R., Al-Samman, T., Letzig, D. and Yi, S.
(2022) Journal of Magnesium and Alloys 10(1): 146-159
https://doi.org/10.1016/j.jma.2021.07.003

Combining gradient structure and supersaturated solid solution to achieve superior mechanical properties in WE43 magnesium alloy
Sun, W., Wu, B., Fu, H., Yang, X.-S., Qiao, X., Zheng, M., He, Y., Lu, J. and Shi, S.-Q.
(2022) Journal of Materials Science & Technology 99: 223-238
https://doi.org/10.1016/j.jmst.2021.04.074

Precipitation of stable icosahedral quasicrystal phase in a Mg-Zn-Al alloy
Singh, A., Hiroto, T., Ode, M., Takakura, H., Tesař, K., Somekawa, H. and Hara, T.
(2022) Acta Materialia 225: 117563
https://doi.org/10.1016/j.actamat.2021.117563

Mechanistic study of Mg-Mn-Al extrusion alloy with superior ductility and high strength
Shao, L., Zhang, C., Li, C., Tang, A., Liu, J., Yu, Z. and Pan, F.
(2022) Materials Characterization 183: 111651
https://doi.org/10.1016/j.matchar.2021.111651

Precipitation in lean Mg–Zn–Ca alloys
Schäublin, R. E., Becker, M., Cihova, M., Gerstl, S. S. A., Deiana, D., Hébert, C., Pogatscher, S., Uggowitzer, P. J. and Löffler, J. F.
(2022) Acta Materialia 239: 118223
https://doi.org/10.1016/j.actamat.2022.118223

Al–Mn–Fe intermetallic formation in AZ91 magnesium alloys: Effects of impurity iron
Peng, L., Zeng, G., Xian, J. and Gourlay, C. M.
(2022) Intermetallics 142: 107465
https://doi.org/10.1016/j.intermet.2022.107465

Characterization and modeling of concurrent precipitation in Mg-Al-Sn alloys using an improved Kampmann-Wagner numerical (KWN) model
Miao, J., Zhang, C., Klarner, A. D., Zhang, J., Cinkilic, E., Zhang, F. and Luo, A. A.
(2022) Materialia 21: 101348
https://doi.org/10.1016/j.mtla.2022.101348

Towards high strength cast Mg-RE based alloys: Phase diagrams and strengthening mechanisms
Meier, J. M., Caris, J. and Luo, A. A.
(2022) Journal of Magnesium and Alloys 10(6): 1401-1427
DOI: https://doi.org/10.1016/j.jma.2022.03.008

Phase equilibria and microstructure investigation of Mg-Gd-Y-Zn alloy system
Meier, J. M., Miao, J., Liang, S.-M., Zhu, J., Zhang, C., Caris, J. and Luo, A. A.
(2022) Journal of Magnesium and Alloys 10(3): 689-696
https://doi.org/10.1016/j.jma.2021.09.019

Tailoring the microstructure and enhancing the corrosion resistance of extruded dilute Mg-0.6Al-0.5Mn-0.25Ca alloy by adding trace Ce
Li, M.-X., Wang, C., Li, Y.-J., Wang, D.-W., Zha, M., Gao, Y. and Wang, H.-Y.
(2022) Corrosion Science 207: 110605
https://doi.org/10.1016/j.corsci.2022.110605

A hot tearing criterion based on solidification microstructure in cast alloys
Hu, B., Li, Z., Li, D., Ying, T., Zeng, X. and Ding, W.
(2022) Journal of Materials Science & Technology 105: 68-80
https://doi.org/10.1016/j.jmst.2021.06.071

Step-by-Step Observation of Secondary-Phase Evolution During the Casting Cracking Process in Mg–Ce–Al Alloys
Hu, B., Li, D., Li, Z., Wang, X. and Zeng, X.
(2022) Metallurgical and Materials Transactions A 53(9): 3478-3492
https://doi.org/10.1007/s11661-022-06766-3

Eutectic intermetallic formation during solidification of a Mg-Sn-Al-Zn-Mn alloy
Deng, Y., Zeng, G., Xian, J., Zhan, H., Liu, C. and Gourlay, C. M.
(2022) Materials Characterization 186: 111807
https://doi.org/10.1016/j.matchar.2022.111807

Effect of microalloyed Ca on microstructure and mechanical properties of Mg–6Zn–1Mn–4Sn (wt.%) alloy
Chen, X., Zhang, D., Zhao, Y., Pan, F. and Liu, Q.
(2022) Journal of Materials Research and Technology 17: 925-936
https://doi.org/10.1016/j.jmrt.2022.01.065

Re-evaluation of the mechanical properties and creep resistance of commercial magnesium die-casting alloy AE44
Zhu, S., Abbott, T. B., Nie, J.-F., Ang, H. Q., Qiu, D., Nogita, K. and Easton, M. A.
(2021) Journal of Magnesium and Alloys 9(5): 1537-1545
https://doi.org/10.1016/j.jma.2021.04.016

The Effect of Sr Addition on Hot Tearing Susceptibility of Mg-1Ca-xSr Alloys
Zhao, H., Song, J., Jiang, B., Yang, H., Xiao, B., Liu, Q., Yang, Z., Jia, X., Liao, J., Wu, L. and Pan, F.
(2021) Journal of Materials Engineering and Performance 30(10): 7645-7654
https://doi.org/10.1007/s11665-021-05925-8

Effect of the pre-homogenization on the precipitation behaviors, mechanical and corrosion properties of as-extruded MgY binary alloys
Yu, H., Dong, X. R., Kang, S. M., Yu, W., Wang, Z. F., Mu, J. Y., Cui, X. W., Li, J. H., Yin, F. X. and Shin, K. S.
(2021) Materials Characterization 178: 111307
https://doi.org/10.1016/j.matchar.2021.111307

Optimized Hot Tearing Resistance of VW63K Magnesium Alloy
Yang, Z., Li, M., Song, J., Jiang, B., Feng, Y., Tang, Y., Zhao, H., Zhang, X., Zhou, W., Li, C. and Pan, F.
(2021) International Journal of Metalcasting
https://doi.org/10.1007/s40962-021-00728-y

Microstructure, mechanical properties and fracture behaviors of large-scale sand-cast Mg-3Y-2Gd-1Nd-0.4Zr alloy
Yang, L., Huang, Y., Hou, Z., Xiao, L., Xu, Y., Dong, X., Li, F., Kurz, G., Sun, B., Li, Z. and Hort, N.
(2021) Journal of Magnesium and Alloys
https://doi.org/10.1016/j.jma.2021.08.010

Microstructure and mechanical properties of Mg-3Sn-1Ca reinforced with AlN nano-particles
Wang, S., Huang, Y., Yang, L., Zeng, Y., Hu, Y., Zhang, X., Sun, Q., Shi, S., Meng, G. and Hort, N.
(2021) Journal of Magnesium and Alloys
https://doi.org/10.1016/j.jma.2021.04.002

The High-Solution Design of Magnesium Alloys
Wang, J., Yuan, Y., Cheng, X., Chen, T., Jiang, B., Li, D., Tang, A., Boll, T. and Pan, F.
(2021) Magnesium Technology 2021, Cham, Springer International Publishing
https://doi.org/10.1007/978-3-030-65528-0_5

Achieving superior combination of yield strength and ductility in Mg–Mn–Al alloys via ultrafine grain structure
Peng, P., Tang, A., Wang, B., Zhou, S., She, J., Zhang, J. and Pan, F.
(2021) Journal of Materials Research and Technology 15: 1252-1265
https://doi.org/10.1016/j.jmrt.2021.08.133

Extrusion limit diagram of AZ91–0.9Ca–0.6Y–0.5MM alloy and effects of extrusion parameters on its microstructure and mechanical properties
Lee, D. H., Kim, Y. J., Kim, S.-H., Moon, B. G. and Park, S. H.
(2021) Journal of Magnesium and Alloys
https://doi.org/10.1016/j.jma.2021.06.002

Influence of undissolved second-phase particles on dynamic recrystallization behavior of Mg–7Sn–1Al–1Zn alloy during low- and high-temperature extrusions
Kim, H. J., Jin, S.-C., Jung, J.-G. and Park, S. H.
(2021) Journal of Materials Science & Technology 71: 87-97
https://doi.org/10.1016/j.jmst.2020.08.056

Effects of Ce content on the modification of Mg2Si phase in Mg-5Al-2Si alloy
Hu, B., Zhu, W.-J., Li, Z.-X., Lee, S. B., Li, D.-J., Zeng, X.-Q. and Choi, Y. S.
(2021) Journal of Magnesium and Alloys
https://doi.org/10.1016/j.jma.2021.08.031

Effect of Mn Addition on Melt Purification and Fe Tolerance in Mg Alloys
Chen, T., Yuan, Y., Liu, T., Li, D., Tang, A., Chen, X., Schmid-Fetzer, R. and Pan, F.
(2021) JOM Journal of the Minerals, Metals and Materials Society 73(3): 892-902
https://doi.org/10.1007/s11837-020-04550-5

Research on the Effect of Sr and Zr on Microstructure and Properties of Mg–4Zn Alloy
Bian, J., Yu, B., Jiang, L., Hao, J., Zhu, H., Jin, P., Zheng, L. and Li, R.
(2021) International Journal of Metalcasting 15(4): 1483-1498
https://doi.org/10.1007/s40962-021-00576-w

On the Equilibrium Intermetallic Phase in Mg-Nd-Ag Alloys
Zhao, X., Li, Z., Chen, H., Schmid-Fetzer, R. and Nie, J.-F.
(2020) Metallurgical and Materials Transactions A 51(3): 1402-1415
https://doi.org/10.1007/s11661-019-05580-8

Effect of Al Content on Hot-Tearing Susceptibility of Mg-10Zn-xAl Alloys
Vinodh, G., Jafari Nodooshan, H. R., Li, D., Zeng, X., Hu, B., Carter, J. T. and Sachdev, A. K.
(2020) Metallurgical and Materials Transactions A 51(4): 1897-1910
https://doi.org/10.1007/s11661-020-05657-9

Intermetallic Phase Formation in Mg–Ag–Nd (QE) and Mg–Ag–Nd–Zn (QEZ) Alloys
Schmid-Fetzer, R., Nie, J.-F., Zhao, X. and Chen, H.
(2020) Magnesium Technology 2020, Cham, Springer International Publishing
https://doi.org/10.1007/978-3-030-36647-6_13

Two-Stage Settling Approach to Purify Mg Alloy
Liu, J., Chen, T., Yuan, Y., Wu, J., Yang, L., Tang, A., Li, D. and Pan, F.
(2020) Magnesium Technology 2020, Cham, Springer International Publishing
https://doi.org/10.1007/978-3-030-36647-6_11

3D thixo-printing: A novel approach for additive manufacturing of biodegradable Mg-Zn alloys
Lima, D. D., Campo, K. N., Button, S. T. and Caram, R.
(2020) Materials & Design 196: 109161
https://doi.org/10.1016/j.matdes.2020.109161

Solidification of Mg–Zn–Zr Alloys: Grain Growth Restriction, Dendrite Coherency and Grain Size
Li, P., Hou, D., Han, E.-H., Chen, R. and Shan, Z.
(2020) Acta Metallurgica Sinica (English letters) 33(11): 1477-1486
https://doi.org/10.1007/s40195-020-01069-1

On the Texture Weakening During Electropulse Annealing Treatment of Mg-1Ce Alloy: The Role of Nucleation and Nucleus Growth
Kuang, J., Du, X., Al-Samman, T., Li, X., Liu, G. and Sun, J.
(2020) Metallurgical and Materials Transactions A 51(12): 6640-6657
https://doi.org/10.1007/s11661-020-06025-3

A rational interpretation of solidification microstructures in the Mg-rich corner of the Mg–Al–La system
Kim, M., McDonald, S. D., Abbott, T. B., Easton, M. A., Ali, Y., StJohn, D. H. and Nogita, K.
(2020) Journal of Alloys and Compounds 844: 156068
https://doi.org/10.1016/j.jallcom.2020.156068

Excellent age hardenability with the controllable microstructure of AXW100 magnesium sheet alloy
Jo, S., Whitmore, L., Woo, S., Aramburu, A. U., Letzig, D. and Yi, S.
(2020) Scientific Reports 10(1): 22413
https://doi.org/10.1038/s41598-020-79390-z

Improved Corrosion Resistance in AZ61 Magnesium Alloys Induced by Impurity Reduction
Dai, Y., Chen, X.-H., Yan, T., Tang, A.-T., Zhao, D., Luo, Z., Liu, C.-Q., Cheng, R.-J. and Pan, F.-S.
(2020) Acta Metallurgica Sinica (English letters) 33(2): 225-232
https://doi.org/10.1007/s40195-019-00914-2

CALPHAD-Based Modeling and Experimental Validation of Microstructural Evolution and Microsegregation in Magnesium Alloys During Solidification
Zhang, C., Miao, J., Chen, S., Zhang, F. and Luo, A. A.
(2019) Journal of Phase Equilibria and Diffusion 40(4): 495-507
https://doi.org/10.1007/s11669-019-00732-0

Recent Progress in Development and Applications of Mg Alloy Thermodynamic Database
Schmid-Fetzer, R.
(2019) Journal(Issue): 249-255
https://doi.org/10.1007/978-3-030-05789-3_37

Semi-solid state mixing of Mg-Zn-RE alloys—microstructure and mechanical properties
Rogal, L. and Garzel, G.
(2019) Journal of Materials Processing Technology 264: 352-365
https://doi.org/10.1016/j.jmatprotec.2018.09.012

Dynamic precipitation and recrystallization in Mg-9wt.%Al during equal-channel angular extrusion: A comparative study to conventional aging
Ma, X. L., Eswarappa Prameela, S., Yi, P., Fernandez, M., Krywopusk, N. M., Kecskes, L. J., Sano, T., Falk, M. L. and Weihs, T. P.
(2019) Acta Materialia 172: 185-199
https://doi.org/10.1016/j.actamat.2019.04.046

Time-sequential corrosion behaviour observation of micro-alloyed Mg-0.5Zn-0.2Ca alloy via a quasi-in situ approach
Jin, Y., Blawert, C., Feyerabend, F., Bohlen, J., Silva Campos, M., Gavras, S., Wiese, B., Mei, D., Deng, M., Yang, H. and Willumeit-Römer, R.
(2019) Corrosion Science 158
https://doi.org/10.1016/j.corsci.2019.108096

Thermal stability of Al2MgC2 and thermodynamic modeling of the Al–C–Mg system – Application to grain refinement of Mg–Al alloys
Deffrennes, G., Gardiola, B., Lomello-Tafin, M., Pasturel, A., Pisch, A., Andrieux, J., Schmid-Fetzer, R. and Dezellus, O.
(2019) Calphad 67
https://doi.org/10.1016/j.calphad.2019.101678

Experimental investigation and simulation of precipitation evolution in Mg-3Nd-0.2Zn alloy
Xia, X., Sanaty-Zadeh, A., Zhang, C., Luo, A. A. and Stone, D. S.
(2018) Calphad 60: 58-67
https://doi.org/10.1016/j.calphad.2017.11.006

Applications of CALPHAD modeling and databases in advanced lightweight metallic materials
Shi, R. and Luo, A. A.
(2018) Calphad 62: 1-17
https://doi.org/10.1016/j.calphad.2018.04.009

The Mg–Ca–O system: Thermodynamic analysis of oxide data and melting/solidification of mg alloys with added CaO
Liang, S. M., Kozlov, A. and Schmid-Fetzer, R.
(2018) Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques 109(3): 185-200
https://doi.org/10.3139/146.111596

Precipitation evolution and hardening in Mg-Sm-Zn-Zr alloys
Xia, X., Sun, W., Luo, A. A. and Stone, D. S.
(2016) Acta Materialia 111: 335-347
https://doi.org/10.1016/j.actamat.2016.03.068

Effect of traces of silicon on the formation of Fe-rich particles in pure magnesium and the corrosion susceptibility of magnesium
Yang, L., Zhou, X., Liang, S.-M., Schmid-Fetzer, R., Fan, Z., Scamans, G., Robson, J. and Thompson, G.
(2015) Journal of Alloys and Compounds 619(0): 396-400
https://doi.org/10.1016/j.jallcom.2014.09.040

Effects of Sb content on solidification pathways and grain size of AZ91 magnesium alloy
Hou, D. H., Liang, S. M., Chen, R. S., Dong, C. and Han, E. H.
(2015) Acta Metallurgica Sinica (English letters) 28(1): 115-121
https://doi.org/10.1007/s40195-014-0178-4

Solidification Behavior and Grain Size of Sand Casting Mg-6Al-xZn Alloys
Hou, D., Liang, S.-M., Chen, R. and Dong, C.
(2014) Acta Metallurgica Sinica 50(5): 601-609
https://doi.org/10.3724/sp.j.1037.2013.00558

Thermodynamic simulation of phase formation during blending of Mg-alloys by thixomolding
Kozlov, A., Djurdjevic, M. and Schmid-Fetzer, R.
(2007) Advanced Engineering Materials 9(9): 731-738
https://doi.org/10.1002/adem.200700156%5B/vc_column_text%5D%5B/vc_column%5D%5B/vc_row%5D%5Bvc_row%5D%5Bvc_column%5D%5Bvc_column_text%5D

Publications related to different topics